[ad_1]
At just five months from the announcement of the next generation of Apple iPhone 11, leaks have increasingly begun to multiply. For Apple fans, it's both good news and bad news. The good news is that Apple's hardcore fans love to learn what their favorite company is doing before everyone else. The bad news is that their favorite company might not be too impressive in 2019 when it comes to the new iPhone hardware. From all that we have seen so far, the next series of Apple's iPhone 11 will use the same general design that has been used by the iPhone since the launch of the iPhone X in 2017. In fact, it seems that we are in a similar situation. on iPhone 7, when Apple used the same iPhone design for the third year in a row and only changed the camera on the back.
In the case of the iPhone 11, it might look identical to that of the iPhone X and the iPhone XS on the front, but the backs announce quite different. Rather than a small rear camera camera, the iPhone 11 will apparently have a huge camera with three lenses and an LED flash. We hope that Apple is considering a major camera upgrade of its new iPhones in 2019, which is good news because Apple iPhones are far behind the leaders like Huawei and Google in the camera department. Now, a new leak seems to reinforce the camera design that we have seen repeatedly in the iPhone 11, suggesting that everything we've seen so far is probably as accurate.
Just last week, we saw a leak of schematics that would have shown an illustration of the chassis of the iPhone 11. The chart appeared to be displayed on a computer in a factory where the iPhone 11 is in the process of fabrication and showed a series of solder points indicating where the middle plate would be attached to the stainless steel frame placed around the outside edge of the printer. phone.
Here is the diagram in question:
Take a closer look at this middle plate in the center of the iPhone 11 chassis illustration. Now, check out the following image released Thursday morning on the Weibo Chinese microblogging network:
The image was released with the rendering of the iPhone 11 shown at the top of this article, and it looks like it's the same iPhone's middle plate pictured in the leak last week. If it's legitimate, the piece was probably stolen from a Foxconn factory, and it tells us more about the design of the iPhone 11.
First, we can see a big hole in the center where the iPhone 11's wireless charging coil will go, although it's hardly surprising that the handset supports wireless charging. In fact, it seems that the iPhone 11 supports two-way wireless charging, so it can also charge other devices, just like the new Samsung Galaxy S10.
Of course, it is more important that the wireless charging coil reside in the space available for the three-lens camera array in the upper corner of the center plate. It has the same shape as the camera configuration of the iPhone 11, which we have seen running away a few times now, and it seems to confirm the curved hump of the square camera that we have seen many times. In addition to the three lenses, there is also room for one LED flash and another sensor in the lower right corner.
The new iPhone 11 Apple should be launched in September, as all Apple iPhones from the iPhone 4S. We will see a lot of leaks before Apple returns official phones.
[ad_2]
Source link