[ad_1]
One of the first teardowns of Apple’s new MagSafe battery aired on YouTube on Thursday, revealing the inner workings and construction of the accessory.
Charger Lab offered a full description of the new Apple product, including unboxing and superficial testing, in a video posted to its YouTube channel.
As you would expect, Apple’s MagSafe Battery is not designed to be opened or repaired by general consumers. Separating the cover from its seat in the pack’s white plastic shell is a difficult process that required the use of a lever. The adhesive seems to hold the two parts together.
Inside, a charging coil disposed inside the front cover cooperates with another coil connected to the battery pack to power an iPhone 12. An NFC detection coil and the corresponding chip reside on the cover, while an NFC detection coil and the corresponding chip reside on the cover. Ring of magnets encircling the coil pack complements the MagSafe standard.
The internal components are protected by an abundant amount of thermal protection. Wireless power controllers and associated circuits are mounted on a PCB which is connected to a large metal plate.
In the white shell – itself lined with thermal protection material – are two batteries that work in series to reach 11.13 Wh at 7.62 V. Charger Lab notes that the printed capacity of 1460 mAh at 7 , 62 V is equivalent to approximately 2220 mAh at 5 V. Each cell is rated at 5.733Wh.
For a closer look at the new accessory, check out AppleInsider’s initial practice.
[ad_2]
Source link