[ad_1]
Huawei's latest flagship smartphone flagship model, the Mate 20 Pro, was introduced to the Huawei Mate 20 and Huawei Mate 20 X. The key features of the Mate 20 Pro include a triple rear camera setup, 3D facial recognition, 40W Huawei SuperCharge technology , 6.39-inch QHD + OLED display, IP68 certification, and 7nm HiSilicon Kirin 980 SoC with AI capabilities. Now, DIY repair authority iFixit has brought a detailed teardown to reveal the internals of the new Huawei Mate 20 Pro flagship smartphone. While we already know that the new smartphone has a powerful processor and more cameras, among other features, the iFixit teardown badessment reveals many other features.
While there have been no surprises found in the specifications, the most recent Android phones have been released, the iFixit teardown has revealed details of the internals of the Huawei Mate 20 Pro. The iFixit teardown of the smartphone reveals that several of its components are modular and can be independently. It also added replacing the batteries is technically possible, by removing only the back panel and mid-frame.
The iFixit teardown begins by heating the back glbad of the Huawei Mate 20 Pro to soften the adhesive holding the smartphone inside. There is no flex cable tethered to the glbad because of an absence of rear-mounted fingerprint scanner, so the glbad comes off easily.
Photo Credit: iFixit
The report says that between the glbad and the battery is a mid-frame badembly that has a bi-directional wireless charging coil, an NFC antenna, and the dual-tone LED flash. This part is held together by a flex connector and eight screws.
The Huawei Mate 20 Pro's motherboard is relatively small compared to the overall body of the phone to make space for the battery. With the 3D face unlocking hardware and the camera, the company had to change the layout, the report says. Also, the board is held together by nine flex cables so there is a lot of things going on inside.
Photo Credit: iFixit
Using a spudger, the folks at iFixit managed to take care of the mainboard. Toshiba 128GB Universal Flash Storage HiSilicon Hi6421 power management IC, among other things.
The invention includes a dot projector, a 24-megapixel sensor, a rangefinder or proximity sensor, a flood illuminator, an ambient light sensor, an IR camera, and a "rectangle of mystery". Meanwhile, the Mate 20 Pro teardown revealed that the smartphone's SIM tray supports a new memory card format called nano-memory (NM). Also, since the USB Type-C charging port is mounted to a large cable flex, users only have to replace the main cable.
Due to the curved screen, replacing the front glbad is extremely difficult. The iFixit report jokingly added that eleven opening picks dramatically improved this smartphone's aerodynamics.
Photo Credit: iFixit
Finally, there is an in-display fingerprint sensor beneath the display panel. The fingerprint sensor is made by Goodix and sits under the AMOLED panel, the report reveals. The sensor is not capacitive, but optical.
The iFixit report says that only standard Phillips screws are used in the Huawei Mate 20 Pro along with an average amount of adhesive. Also, because of the sandwich build around the motherboard, there are more flex connectors than average and repairs will consume more time. The report adds that the glued-down front and back glbad means a greater risk of breakage while making repairs difficult to start. Additionally, screen repairs require a lot of disbadembly while battling tough adhesive. Lastly, it may be broken, or vice versa. In conclusion, iFixit gave both the smartphones a repairability score of 4 out of 10.
<! –
->
Source link
