[ad_1]
One of the incredible deals on Amazon Prime Day is a Doorbell Pro Video Ring and, if you have one, let me tell you that it's really great. Seeing who is at the front door can be very handy, especially when you're not at home to take a look over the curtains and peek out. eye. But the pleasure will be short-lived if you do not have an existing door chime transformer powerful enough to power the thing.
Even if you already have a doorbell, your transformer may not provide enough power for a Ring Pro.
Chances are you already have a chime transformer at home, especially if you already have a bell. It is a small metal electrical device that converts the voltage of your house into low voltage, which a chime bell needs. You would not even know that she was there unless you needed to replace her. Since most door chimes do not require a lot of current, it is quite common to find 8V or 16V / 15-20VA transformers (volt-amperes, unit of current in an electrical circuit), especially in homes over 20 years old.
This is also the first thing to consider if your new Ring Pro is not working properly. Your current transformer may be enough for things to turn on and initially connect to Wi-Fi, but once you try to connect a video or even send data through the application or your virtual assistant, things can get a little twisty and the whole job will be locked up. As your Ring Pro does more things, it needs more power and a low power transformer can not supply it.
Here is where we must mention that you must be safe. Finding and changing a door chime transformer is not difficult, but it is connected to the 110 volt power supply of your home and can be potentially dangerous. If you do not know what you are doing or trust, you can do it yourself, call an electrician.
If you think your transformer is not powerful enough, you must first find it. First look around the chime itself to find a blank cover on an electrical box, then go to the chime itself or to your electrical board if you do not see anything. As one side of the transformer is connected to more than 100 volts, it should not be installed anywhere, but I saw them mounted inside an electrical box in the attic or the subsoil.
It is harder to find the transformer than to change it, but call an electrician unless you know what you are doing.
Once you find it, make sure the power is off and look at the top of the transformer itself. You will find a sticker or engraving indicating the VA voltage and power for which it was designed. You will need a transformer of 16-24 VAC and 30 VA to feed things properly. If it is not what you have, you must change it.
These pieces are not difficult to find and as long as they are properly classified, each of them will work. Amazon is a great place to buy one cheaply. Just buy one that is the same as your current computer and you will be set up in no time.
[ad_2]
Source link