Honda recalls 1.1M models to replace Takata airbags previously considered safe



[ad_1]

Honda is recalling about 1.1 million vehicles that were not yet included in Takata's planned deployment following a person's injury following the explosion of his Maryland inflation system.

The manufacturer claims to be aware of the "driver's arm" injury related to the manufacturing defect of the Takata inflators manufactured in Monclova, Mexico. The Associated Press reported that the type of Takata airbag inflator of the accident had been deemed safe but that it now forces another massive booster.

In total, the recall of the Takata airbags has affected more than 37 million vehicles and 50 million inflators and has caused at least 23 deaths worldwide. A.P. reports that many of the vehicles included in this recall had already been equipped by Canadian safety regulators.

Related: Honda recalls another US $ 1.4 million vehicle to replace Takata airbags

"The affected vehicles received a replacement driver airbag inflator as part of a previous Takata inflator booster recall solution or a replacement driver airbag module containing the same type of inflation as a service piece, "NHTSA said of the new recall.

"Due to a manufacturing error, in the event of an accident requiring the deployment of the front airbag of the driver, these inflators could explode."

Some Takata air bag inflators became explosive and sent metal parts through the cabin when deployed. Ammonium nitrate that ignites the inflation devices can be damaged by moisture over time, especially in humid environments, resulting in a risk of explosion.

From around 2000, the company knew that some ammonium nitrate blowers were not working to the required specifications. Takata also knew that some inflators had failed – including breaks – during testing. The company then submitted fraudulent reports that concealed the true state of its inflators.

Related: Toyota adds 1.7 million additional vehicles to deadly recall of Takata air bags

"The moisture inside the sealed inflator could result in accelerated degradation of the thruster over time, resulting in a higher than normal inflation pressure when deploying the airbag," said Honda in a press release issued on Tuesday. "If the front airbag of the recalled driver deploys in the event of a collision, its inflation device may break and project sharp metal fragments onto the driver and passengers."

The manufacturer claims that the spare parts are available and that the concerned owners should start receiving a reminder notification by mail on April 17th.

Vehicles included in the recall:
2003 Acura 3.2CL
Acura ILX 2013-2016
Acura ILX Hybrid 2013-2014
Acura MDX 2003-2006
Acura RDX 2007-2016
Acura 3.2TL 2002-2003
Acura TL 2004-2006, 2009-2014
Acura ZDX 2010-2013
Honda Accord 2001-2007, 2009
Honda Civic 2001-2005
Honda Civic Hybrid 2003-2005
Honda Civic GX NGV 2001-2005
Honda CR-V 2002-2007, 2010-2011
Honda Element 2003-2011
Honda Fit 2007
Honda Odyssey 2002-2004
Honda Pilot 2003-2008
Honda Ridgeline 2006-2014

To search for active reminders, use the NHTSA website to search for your 17-digit VIN at this link. VIN numbers are usually located under the driver's side windshield or along the interior doors behind the seat or under the steering wheel. To sign up for NHTSA security alerts for a specific vehicle, sign up for this link.

Related: Ford continues to pressure Takata's recall by offering dealerships $ 1,000 to find and repair trucks

[ad_2]

Source link