[ad_1]
Until recently, Sony teased consumers with an internal SSD slot on the PlayStation 5 that did nothing for the end user. It was not until the last Beta 3.0 firmware update and today’s console update that this expansion port was opened to the general public. The 825GB custom SSD built into the PlayStation 5, as gamers soon learned with massive titles like Call of Duty Black Ops Cold War, just wasn’t enough to keep up with the rapid release of new titles. With today’s latest firmware update for the PlayStation 5, we wanted to show you how easy it is to set up and install additional storage space in your favorite console.
To get started, you’ll need a few things: a flat, well-lit surface to work on, a Phillips # 1 screwdriver (any small jeweler or Phillips eyeglass repairer will do), and of course, an M. 2 NVMe compatible with a maximum width of 22 mm. Sony has yet to release a full list of compatible drives, but we have personally tested the Seagate FireCuda 530 ZP1000GM30023 heatsink model. Other NVMe drives that can achieve a read speed of at least 5500MB / s can also function as extended storage on the PlayStation 5. To achieve these speeds, the drive will need to be PCIe Gen 4.
One important thing to note is that whichever drive you go with, you will need an attached heat sink to help dissipate any excess heat and keep the drive at peak performance during normal gaming. Seagate included a heat sink with the FireCuda 530 drive, but for those looking at other drives like Sabrent and Western Digital’s offerings, you’ll need a third-party heat sink if there isn’t one in it. the box. Two fantastic offers that we can recommend are the be quiet! MC1 (not MC1 Pro) and EKWB EK-M.2 heatsinks. Each matches the 22mm size requirements as well as the height limit threshold for the PlayStation 5’s internal SSD slot. If you are curious about how to install the heatsink on your SSD, you can check out a video tutorial below. below Keith May.
Now that you have all the necessary hardware and have downloaded the latest firmware update for your PlayStation 5, you are ready to go through the simple process of expanding this limited capacity with up to 4TB of capacity. additional storage.
First, you’re going to want to remove the vertical stand from the PlayStation 5 and set it aside, and remove all the cords. If you have grounded metal, touch it to disperse any static electricity before handling the PlayStation 5. With the PlayStation 5 resting on a flat surface, first begin by locating the side panel that does not have the PS5 logo (this being the plate that covers the disc drive). Lay the console down so that the disk drive is pointed away from you; the disc drive should be in the upper left corner with the rear ports of the PlayStation 5 facing you.
While grasping the lower right corner of the panel where it protrudes from the console, slightly lift the panel from the PlayStation 5 to release the retaining hooks and then push the plate to the left (toward the disc drive). There is a small force needed to detach the plate in the first place, but be careful not to break or crack the side plate while doing so. Once the side plate is moved, it should detach easily and expose both the side fan and the M.2 slot housing.
With the side panel removed, use your Phillips # 1 screwdriver to remove the screw that holds the SSD cover in place and set it aside.
Then remove both the black screw and the SSD spacer socket. Set the screw aside and move the plug to the 80mm hole. Discharge any static electricity again for safety, then take the desired M.2 drive and plug it into the outlet, then gently lay it over the spacer plug you recently moved. Screw the M.2 drive into place. Then close the SSD panel and replace it with the black screw you previously set aside.
Once the SSD is installed, you can replace the side plate of the PS5 by positioning it so that the holes line up with the posts of the side plate, then gently push it into position with the palm of your hand. hand. The side plate should snap back into place with minimal force. Then simply swap out the PlayStation 5 base in your preferred orientation, reconnect all cords, then turn on the console normally.
Once on the latest firmware, you should receive a message stating that the M.2 drive needs to be formatted for regular use. If this is your first time using the out-of-the-box drive, the formatting process only takes a moment or two.
After formatting and preparing the M.2 drive for first use, the PlayStation 5 will perform a speed test to ensure that the drive meets or exceeds the recommended speeds of 5500MB / s.
A completely optional step is to go to System Settings> Storage> Install Location to choose whether to install PS4 and / or PS5 titles to console storage or M.2 storage (PS4 titles can be automatically installed on any USB extended storage, but PS5 titles will need to be moved manually).
Hopefully this short tutorial has helped allay your fears about opening the PlayStation 5 and installing your very first M.2 SSD in the console now that the latest firmware update supports it. Picked an SSD that was not on the compatibility list and wanted to share it with our readers? Let us know in the comments below!
[ad_2]
Source link