The first Sonos sound amplifier developed for architecture

The first Sonos sound amplifier developed for architecture

Placed in hidden places inside and outside walls and ceilings

Wall speakers with "Sonos" amplifier

London: Middle East

As part of a partnership with Sunans, Sonos, a sound amplifier manufacturer, introduced new hidden speakers designed for indoor and outdoor installation, paired with its new amplifier.
Hidden speakers
Sonos has already begun receiving pre-orders for its first acoustic sound amplifier designed in collaboration with Sunans. The new collection, Sonos Architectural, features hidden surround sound amplifiers for walls, ceilings and open-space platform surfaces, designed to take inspiration from the new Sonos audio amplifier announced in the fall latest.
Last month, Sonos opened the door to advance orders to buy wall and ceiling towers on its website for $ 599 per megapixel, but producers will be available on the market on February 26. It should be noted that the mesh covers of the above speakers can be covered to match any installed surface.
Sonos' new Sonos Sound System, designed by Sunans, will cost you $ 799 and will be available on the market from April. These external amplifiers are fixed by arches and have features that allow them to withstand various natural factors, such as moisture, water, salt spray, ultraviolet rays and extreme cold.
The three new speakers have an 8 ohm configuration (electrical resistance) and can be mounted in two different ways: they are equipped with a polyurethane amplifier output, a magnetized fluid cooled 1 inch and a motor high 6.5 inch polyurethane speaker.
Sonos states that the response of frequency amplifiers ranges from 44 Hz and 20 KHz per hour to + 3 dB for internal designs, ranging from 55 Hz and 20 KHz to + 3 dB for external speakers. The sensitivity ratio in the three models is 89 decibels for sound pressure (2.83 volts per meter).
Audio pairing
The power functions available in the new range of amplifiers are designed for pairing with the sonic amplifiers, namely: minimum 5 watts and maximum 130 watts (according to the classifications, the maximum power generated by the sonic amplifiers is 125 watts) For a channel and up to 8 ohms of power). The Sonos amplifier is equipped with power outlets. Sonos says that each amplifier is capable of handling three geometric sound amplifiers among those recently designed by Sunans.
The customer needs an incision of 8 inches and a quarter, and a depth of 4 inches and three quarters of an inch to install the ring mold for ceiling speakers (white, 9 inches, 3/4 inch in diameter). Rectangular wall amplifiers require 10 ", 3", 6 ", 15", 16 "and 3" and 1 "x 12" incisions.
The white grilles of the magnifying capacitors are 8 inches, 3 inches, 12 inches and 1/4 inches. Users can control the internal speakers in any room using Sonata and Play-by-Play software from Sony.
The external speakers are designed to be installed on surfaces and measure 6.86 inches deep, 12.14 inches tall and 7.51 inches wide (although the technical design suggests that they can be installed in a projection). "The outdoor spaces are very diverse and can not be managed by the room's special" Play-by-Play "program, says Sonos.
Sonans is renowned for the construction of sophisticated technical loudspeakers and unique sound amplifiers sold for special installations. All its products are designed for a hidden installation, at the heart of walls and ceilings, so that the consumer can to hear them without seeing them.