[ad_1]
NASA has revealed the reason for its explorer’s failure to obtain its first samples, noting that unusually soft rocks on the surface of Mars are responsible. Shortly after the start of its science mission to the Red Planet, the rover has started collecting the first soil sample. But when I pointed the cameras at the titanium tube, it was completely empty.
According to the British newspaper “Daily Mail”, NASA found that it had drilled to the planned depth of about three inches, and that the well itself looked fine, but something clearly went wrong. in the assembly.
Engineers have since determined that the rocks sampled were not strong enough to produce a sample and that small crushed fragments remained in the hole.
The rover now begins its slow 0.01 mph journey to the next sampling location in its quest to find signs of ancient Martian life, with several instruments aboard a NASA plane attached to the mission of study of rocks and sand dunes.
The craft carries 43 samples of titanium tubes, and NASA hopes to collect at least 32 samples while on the Red Planet.
Additionally, thanks to images taken by the Ingenuity helicopter and the rover itself, NASA is confident that the next sampling site contains sedimentary rocks that should be better for collection.
The equipment for the failed mission was in good condition, said Louise Gandora, chief engineer of the Persistence Sampling Campaign, but the rock was not easy to assemble due to its own nature.
And engineer Gandora added that this is not the first time that the Martian probe has encountered resistance from Earth while trying to dig into Martian soil to find out more about the planet.
Note: The content of this short story was written on the seventh day and does not express Egypt’s point of view today, but has been transferred with its content as it is from the seventh day, and we are not responsible for the content of the news and the custody of the aforementioned source.
Source link
