[ad_1]
An SSD reader can be one of the best ways to speed up your desktop PC or your laptop.
In 2018, however, I still meet PC users who answer the question "What storage disk do you have?" The difference between a mechanical hard drive and an SSD is lost on them – and the concept of multiple SSD form factors or interfaces is as unknown as deep space.
SSDs make a huge difference in the performance of your machine and are becoming more common on standard notebooks
They are more expensive than traditional hard drives, but offer better transfer speeds and better performance. better resilience.
Using NAND flash technology to store data in place of a rotating disk, SSDs can access information much faster than mechanical disks and better withstand physical damage.
If you do not have a PC SSD drive, you should look to get one – even if it's only for storing your operating system and major applications.
If you do not know what kind of storage drive you have, ask your tech-savvy friend, or the computer scientist of your company who is
Form Factor and Interface
SSDs desktop and laptop computers are typically standard 2.5-inch drives or smaller M.2 drives.
Some SSDs are also available in a PCIe form factor, but they are usually reserved for workstation or server configurations.
Although the 2.5-inch and M.2 drives are very different, they can share the same SATA interface, which allows data transfer speeds of up to 600 MB. However, some SSD M .2 use an NVMe PCIe interface instead, which allows data transfer rates of up to 16 GB / s.
When buying a SSD, you will need to determine what type of drive your PC supports and whether you want to spend extra money on a faster NVMe SSD. [19659002TheSSDSATAisalsofasterasthemechanicaldiscsgenerallyallowuptoamaximumof600Mb/sec
In comparison, a decent mechanical hard drive will give you transfer speeds of 150MB / s.
Important Specifications
The choice between different SSD products can be confusing, especially when comparing specifications. [19659002Endoutofindustrialdeproductsandinterfaccesystemsarmostimportantaregenerallyadapacityofstorageandread/writespeeds
The storage capacity is relatively explicit and refers to the maximum amount of data that the disk can store. ] Read a Write speeds nd are a little more complicated and are usually broken down into two specifications – Sequential and Random
Sequential speeds refer to the maximum speed reached by the SSD during playback or playback. Writing unfragmented files to or from the disk. Random read and write speeds measure the ability of the drive to quickly access small files on the disk.
For this reason, sequential read and write speeds are measured in MB / s, while random read and write speeds per second (IOPS).
Other important specifications to consider are the mean time to failure (MTTF) and the endurance figures, measured in hours and terabytes respectively.
They provide a good idea of the expected operational life of the SSD. .
If you have a limited budget or if your company does not offer a 250GB or 500GB SSD for you, try buying a 60GB or 120GB model and run it with your hard drive. mechanical hard.
The 120GB SSD drives revolve around R550 and can store your operating system and some key applications.
High Speed Storage vs. Value
SSDs and Mechanical Disks Both Have Their Advantages
The main drawback from the purchase of a SSD is the higher price per gigabyte of storage
However, most modern mid-range laptops include a SSD, or you can buy a small one, as explained upper. When you choose a disk capacity for your SSD, you need to balance your data transfer needs with your budget.
If you do not regularly move large files or perform heavy tasks such as video editing and gaming, you can choose a small SSD, then mechanical storage for all your files.
For video publishers and large users, high-capacity SSDs for applications and key files can make a huge difference to productivity.
single SD card
[ad_2]
Source link
