[ad_1]
AMD reaffirmed the launch of its future 7nm products, including Ryzen 3000 processors, EPYC Rome server chips and AMD Radeon Navi graphics cards, in the third quarter of 2019. The launch of these three product lines is planned for the third quarter 2019 and confirmed availability of AMD has annual meeting of shareholders.
Confirmation of the availability of the Ryzen 3000, EPYC Rome and Radeon Navi product lines based on AMD 7 nm processors available in the third quarter of 2019
The confirmation suggests that AMD is on track for the launch of its next-generation 7nm products, including the AMD Ryzen 3000 series processor for mainstream desktops, EPYC Rome chips for servers, and Radeon Navi graphics cards for gaming computers. All three products will feature TSMC process technology as well as new architectures, with Ryzen and EPYC powered by the new Zen 2 and Radeon Navi processor cores powered by an all-new GPU architecture that replaces its predecessors based on on Vega.
AMD Ryzen 3000 Series Desktop Processors – Here's What to Expect
The AMD Ryzen 3000 series is based on the new Zen 2 main architecture, made possible by TSMC's 7 nm process node. AMD has reaffirmed that its Zen 2.0-based Ryzen 3000 series processors for the AM4 desktop platform will be available mid-2019. As early as CES 2019, AMD presented a sample of 8 cores of its 3rd Gen Ryzen desktop processor against the Intel Core i9-9900K. The AMD sample was not only faster but consumed much less energy.
The sample, however, was only the tip of the iceberg, as AMD had assured that it was still an earlier version and that the speeds final clock would be higher in retail variants. In addition, it was later confirmed that the processors in the Ryzen 3000 series included up to 16 cores, as there was room for a second Zen 2 die on the chip's main interposer. , which should allow the AM4 platform to benefit from enthusiastic level multithreading performance.
AMD has made significant changes to their processor architecture, doubling the throughput of their first-generation Zen architecture. Key points include a completely redesigned execution pipeline, major floating point advances that doubled 256-bit floating point registers, and dual bandwidth for load / storage units. One of the key improvements for Zen 2 is the doubling of the base density, which means that we are now looking at twice the number of cores for each major complex (CCX).
- Improved Pipeline
- Floating point doubled (256 bits) and load / storage (doubled bandwidth)
- Base density doubled
- Half of the energy per operation
- Improved branch forecast
- Best Pre-recovery instruction
- Reoptimized instruction cache
- Operation Cache larger
- Increased Bandwidth Dispatch / Retire
- Maintain high throughput for all modes
Zen 2 also includes more significant hardware enhancements for security. This further strengthens the AMD processors against the improved spectrum variants and these remedies will be fully adopted by Zen 2. Acting Zen, AMD already had a strong support for software-level security, which 39, it has further improved through low-level software solutions. .
The AMD X570 Chipset – A New Home for Next-Generation AMD Processors, Ryzen 3000
As we saw with X470, there were some features for the Ryzen 2000 series processors that were supported only by new motherboards such as Precision Boost Overdrive and XFR 2.0. There is no doubt that the AMD Zen 2 based Ryzen consumer processor family would come with new features, but the main highlight would be PCIe Gen4 support. The X570 platform will be a fully PCIe Gen4 solution, which means it will probably be the first mainstream platform to support the new PCIe standard.
Here is a preview of a future ASRock X570 Phantom Gaming motherboard that should be unveiled at Computex 19.
This does not mean, however, that the AMD Ryzen 3000 series will only be compatible on X570 cards because, just like last time, the new processors will also be compatible with X470 and X370 cards. They will not display the same features as the newly launched X570 series, but will provide completely stable functionality for users who simply want to install a new processor and continue to use their PC without having to upgrade the motherboard. everything from scratch.
AMD Radeon Navi graphics cards: that's what to expect
We know some information about the features that AMD Navi GPUs would support, such as Ray Tracing, which has recently been confirmed as the next generation of Sony and Microsoft consoles using AMD Navi 10 GPUs and Ryzen processors based on Zen 2. There was also talk of introducing Variable Rate Shading on Navi GPUs as AMD's proposal to further modernize their Radeon graphics card for the consumer market.
Navi might be AMD's latest GCN (Graphics Core Next) DNA-based GPU architecture. The AMD Linux driver confirmed that Navi relied on GCN and was codenamed GFX1010, while Vega was called GFX900. Major improvements would be made to Navi's architecture in terms of CPI and efficiency at 7nm would be a showcase of the new maps, providing more drastic results compared to the Radeon VII which was also based at 7nm but was simply a reduced Vega 10 graphics card (Vega 20).
We've already seen a printed circuit board leak for a future Navi-based GPU with GDDR6 memory and some of the supposed specifications listed below, but one thing is for sure: Navi-based Radeon GPUs will replace existing traditional maps while Radeon VII will continue as AMD's flagship product until the introduction of a high-end Navi card, which is currently being discussed for 2020.
Alleged specifications of the AMD Radeon RX 3000 Series
| Graphic card | GPU | Units of calculation | VRAM | TDP | Performance class (Competition) |
Price (RUMOURE) |
|---|---|---|---|---|---|---|
| RX 3090 XT | Navi 20 | 64 | – | 225W | Radeon VII + 10% | US $ 500 |
| RX 3090 | Navi 20 | 60 | – | 180W | ~ Radeon VII | US $ 430 |
| RX 3080 XT | Navi 10 | 56 | – | 190W | ~ RTX 2070 | US $ 330 |
| RX 3080 | Navi 10 | 52 | 8GB GDDR6 | 175W | Vega 64 + 10% | US $ 280 |
| RX 3070 XT | Navi 10 | 48 | – | 160W | Vega 64 | US $ 250 |
| RX 3070 | Navi 12 | 40 | 8GB GDDR6 | 130W | Vega 56 | US $ 200 |
| RX 3060 | Navi 12 | 32 | 4GB GDDR6 | 75W | RX 580 | US $ 140 |
AMD EPYC Server Processors Rome – Here's What to Expect
With regard to Rome EPYC processors, AMD has confirmed its intention to launch the third quarter of 2019, which should be a few months away from the Ryzen and Ryzen Threadripper processors. The AMD EPYC Rome family of processors is expected to increase AMD's processor market share to 10% by 2020, which is good considering Intel's former CEO, Brian Krzanich, who said 'he did not want AMD to hold 15% of the market, but the demand and the adoption of EPYC processors on the main server platforms, 15% should not be too far away from now.
For the sake of the numbers, Dell EMC announced that it would triple its AMD server offering by adopting more EPYC processors.
"On about 50 platforms we have today," he said, "three of them are AMD systems – we are likely to triple that figure by the end of the year ".
He also confirmed that Dell EMC would launch servers based on AMD's latest architecture – a 7-nm architecture called "Rome" – in the second half of 2019.
– Dominique Vanhamme (Vice President and General Manager of Storage and Computing at DELL EMEA)
via IT Pro
Based on this strong growth and adoption rate, we can expect AMD to be a blow to Intel's Xeon efforts and their server-side activities. We should expect up to 64 cores and 128 threads as well as impressive PCIe Gen 4 connectivity with up to 162 channels, as summarized here.
It should also be noted that when AMD designed its Zen 2 2-core EPYC Rome processors, they internally estimated the performance of the next-generation Intel server part. The next generation of 10 nm, Ice Lake-SP, is scheduled for 2020. Cascade Lake-SP and Cooper Lake-SP will be proposed as an intermediate solution at 14 nm (++), while Cascade Lake-AP and Cooper Lake -AP would be designed as a multi-core HPC part.
"Rome was designed to compete favorably with Xeons 'Ice Lake', but it will not compete with that chip. We are incredibly enthusiastic and everything comes together at some point. – Forrest Norrod.
"Our plan for the Naples-Rome-Milan roadmap was based on assumptions based on Intel's roadmap and our estimate of what we would do if we were Intel," Norrod continues.
"We have deeply reflected on their identity, their culture and their likely reactions. We planned our efforts based on a very aggressive Intel roadmap. we thought that Intel could do. And then we discover that they can not do what we thought we could do. And then, we have an incredible opportunity
via TheNextPlatform
AMD has confirmed that its EPYC Rome processors were designed to compete with Intel Ice Lake-SP components. It only means that AMD would have an even greater advantage over the Intel 14nm ++ server components that will arrive this year.
One of the main advantages of the EPYC Rome processors on Intel components is that they will be socket compatible with EPYC Naples so that all vendors that use Naples get immediate compatibility for the AMD EPYC Rome processors. next-gen 7nm on day one.
AMD seems to be really well positioned with its EPYC server processors, even more than its desktop and mobility portfolios. If all goes well for AMD and its long-term Zen roadmap in the coming years, we can see them again dominating all sectors of the processor market.
AMD has planned several events to pre-announce their upcoming products, starting with Computex 2019 on May 27 and E3 2019 on June 10. AMD will present its new products and will also announce the appropriate availability dates of its consumer lists, which had already been suggested for an official launch in July 2019.
[ad_2]
Source link