[ad_1]
He fell toilet. Your awkward partner hit a glass of water on it. You forgot it was in your pocket when you jumped into the pool. These are just a few of the hundreds of ways your phone can come into fatal contact with liquid.
Fortunately, waterproofing has become the norm on modern phones. New iPhones, Samsung Galaxy devices, and Google’s latest Pixel phones all exhibit some degree of water resistance or waterproofing. A phone’s resistance to water is measured on an IP (or Ingress Protection) scale. If your phone is rated with a high number, like IP67 or IP68 protection, congratulations, you will probably be fine! But if he’s rated lower, or none at all, you need to be prepared for the worst before you start relaxing in the hot tub with your trusty Sidekick.
So when your phone decides to take the plunge, as soon as you’re done panicking, you’ll probably start frantically pressing all the buttons, blowing on them, or blowing it up with a hair dryer to quickly get rid of all that water. . While these are all well-intentioned actions, guess what? Totally the wrong approach. Here is the right way to save your water damaged smartphone.
First of all, get it back as quickly as possible. If your phone is still at the bottom of the hot tub or toilet, take it out as soon as possible. The longer it stays in the liquid, the greater the likelihood of damage.
Once the device is no longer submerged, turn it off immediately. Don’t try to press any of the other buttons or load apps, just turn it off. Remove the holster if you have one. If you have a phone with a removable battery, take out the battery. You want to cut off the power to the device as quickly as possible to avoid the possibility of a short circuit. Most smartphones today don’t have a removable battery, but some older models or newer models designed to be serviceable, like the Nokia 1.3, allow you to remove the battery.
Do not dry your wet phone and do not put it in the oven! Heat can damage the delicate electronics inside. What you need to do is to quickly wipe the bare, case-less phone with a clean towel, making sure that no water accidentally ends up leaking into its charging port, SIM or MicroSD slots, or headphone jack. (if your phone still has one). If there are any traces of water trapped inside cracks or indentations in the case, carefully and cautiously try to use compressed air to blow it out. If you don’t have an air can lying around, you can use your mouth to blow it out gently. Just be careful not to blow the water any further inside the phone or add your own spit to the mix.
Then we have a few different options. If you’re searching the internet or asking a friend, a common tip you’ll hear is to stuff your device into a bag of rice. This often works in a pinch, but this method can cause problems. Although rice is absorbent, it is unable to collect all the moisture lurking deep in your phone, so it only serves as a partial solution. Additionally, the rice becomes mushy and sticky as it absorbs water, then you might end up with pieces of gummy rice stuck in the seams and ports of your phone. To be on the safe side, wrap the phone loosely in a paper towel before dropping it into the rice.
[ad_2]
Source link