[ad_1]
The Ducati Diavel 2019 finally gets the 1,262cc Testastretta engine already used on the Ducati XDiavel.
View Photos
The Ducati Diavel Receives Ducati XDiavel: V-Twin Engine from 1,262 cc
Ducati has announced the updated the Ducati Diavel model with the 1,262cc Testastretta engine from the XDiavel. Unlike the belt drive of the XDiavel, the new 2019 Diavel will benefit from a chain transmission. The Ducati Diavel 1260 2019 now boasts 159 hp at 9500 rpm and 128 Nm of maximum torque starting at 7,500 rpm, against 1,262 cc, the testastretta v-twin with desmodromic distribution. The engine promises smooth performance at low speeds and high-performance sports performance. Ducati has also revised the engine mapping for sportier performance than with the XDiavel.
The Ducati Diavel base is deactivated on the Ohlins suspensions and Brembo M50 high-end compbades
The electronics group is managed by a six-axis Bosch Inertial Measurement Unit (IMU), which adjusts continuously the angles of roll and pitch, as well as the speed of change of altitude. Three driving modes – Sport, Touring and Urban. Each mode has its own engine map, as well as separate settings for traction control, pulley control and ABS cornering. The Ducati Traction Control System offers eight different levels of intervention, so
The 2019 Ducati Gets a Color TFT Display and a Set of State-of-the-Art Electronic Security Solutions
The 2019 The Ducati Diavel 1260 uses a steel mesh frame using the motor as a constrained part of the frame and is attached to both yokes. The die-cast aluminum subframe attaches to the rear cylinder head, while two forged aluminum side plates attach to the engine base and connect to the single-sided swingarm. The Diavel 1260 uses 50mm forks, with damping compression and spring preload adjustable on the left fork tube, while rebound is adjustable on the right tube.
0 Comments
The high-end variant, the 2019 The Ducati Diavel 1260 S gets a fully adjustable 48 mm fork and rear shock from Ohlins. The S model also uses Brembo M50 monobloc front brake calipers, while the standard Diavel 1260 uses Brembo M4.32 calipers. Both variants use double 320mm front discs and a 260mm rear disc. Other features include a color TFT display, hands-free ignition and cruise control. Variant S adds Bluetooth connectivity to the TFT display and full LED lighting.
For the latest automotive news and reviews, follow CarAndBike on Twitter Facebook and subscribe to our YouTube channel.
[ad_2]
Source link
