[ad_1]
After the durability test and the creation of a OnePlus 6T black and transparent, JerryRigEverything decided to disassemble the OnePlus 6T on its YouTube channel and reveal what is inside the device . This disassembly, among other things, shows us what the phone's fingerprint scanner looks like. The disassembly video has a duration of nearly six minutes, while it is integrated in the bottom. This procedure can also help you repair the device or help your local smartphone repair service to do the same if, for any reason (if the damage was entirely your fault), you decide not to return the phone to OnePlus for repair.
In any case, the first thing to do is turn off the power. Then you will need to heat the back shell of the phone a little, preferably with a heat gun. Then you will need a fairly large suction cup that must be attached to the back of the unit, as well as a razor blade or similar tool to cut the adhesive that holds the phone in place, taking care not to cut. something inside using the razor blade. Once you have done all this and removed the back cover, you must remove the silver hinge that holds the battery in place. You can do this by removing a screw that holds it in place. A tab will allow you to remove the battery and this task should be quite easy to do because the battery is not glued to the body of the phone in several places, even with a little adhesive.
At this point, you will need to remove eight screws securing the plastic covering the motherboard. On this plastic stand, you will notice gold contacts, these are used for the NFC to work. Once you have removed this piece of plastic, you will see the alert cursor and its operation, while the camera's sensors and the motherboard will be revealed. You must unplug various connectors and cameras from the phone to be able to remove the motherboard. You must also remove the large silver screen placed in the center of the motherboard. Also, be sure to remove the SIM card tray on its side. At this point, you will be able to access the phone's earpiece and a microphone. If you remove the lower plastic by removing seven screws, you will discover the vibrating motor of the phone, the USB-C port, the speaker and the built-in fingerprint scanning hardware on the screen. There is not much room downstairs, OnePlus uses more or less everything they could get, which explains somehow the removal of the 3.5mm headphone jack.
At this point, you can remove the remaining screws, remove the circuit board and the USB port, which will allow you to fully access the built-in fingerprint reader. Once you have removed the tape covering the fingerprint reader and removed two screws, you will be able to remove the sensor. A camera is attached to the scanner itself to get an image of your unique fingerprint scanner and illuminate the ridges of your finger. That's more or less that, you can see the complete procedure below if you wish, while Jerry partially reassembles the device.
Context: JerryRigEverything has already tested the durability of the OnePlus 6T, while removing the sticker / color from the back cover of the phone. Both of these procedures have been shown in videos, just like this one. OnePlus actually introduced the OnePlus 6T just recently, less than two weeks ago. The device was originally announced in two versions, Mirror Black and Midnight Black, while the third model, the Thunder Purple, arrived a little later, at the official launch of the phone in China. The Thunder Purple variant of the device will remain exclusive to China, which OnePlus has recently confirmed. The OnePlus 6T is quite similar to its brother, the OnePlus 6, because the two phones have a similar construction, have the same processor, the same camera, the same RAM and the same display, even if the OnePlus 6T panel is more tall and narrower. . The OnePlus 6T, unlike the OnePlus 6, has a built-in fingerprint scanner and a much smaller slot, but it does not have a 3.5mm headphone jack or LED notification light. The device is powered by the Octa-core 64-bit Snapdragon 845 SoC, available in 6GB and 8GB RAM variants, while it sports a 6.41-inch FullHD + Optic AMOLED display. The OnePlus 6T also included a 3,700 mAh battery inside, a significantly larger battery than the OnePlus 6's 3,300 mAh unit. OnePlus's proprietary Quick Charge is also included in the package, even if it is not included in the price. 'Calls more' Charge Dash '. The price of the device is similar to that of its predecessor, although the variants in which it is available differ slightly from those offered by the OnePlus 6.
Impact: The OnePlus 6T is one of the smartphones offering the best value for money. For the first time, OnePlus has partnered with one of the US operators to sell the phone in the United States. T-Mobile is the operator in question. It remains to be seen if this will improve the sales figures of the phone, and to what extent, because this phone is quite similar to the OnePlus 6, but on the other hand, it is more aesthetic and finally available from an American operator. That said, it seems that OnePlus plans to announce next year three smartphones, two devices they usually use (the OnePlus 7 and 7T), while a third phone will be a 5G-compatible device, the very first phone of the society. . The company's executive said the company's first 5G compatible device would arrive early next year and would not be part of the company's regular release cycle, suggesting that it could to be launched before the OnePlus 7 and that it will be completely different. name, but we'll see what happens.
Source link
