The "blood moon" in July will be the longest lunar eclipse in a century

According to EarthSky, here is when you can enjoy the show in Australia on July 28 (AEST times):

3.14am: Beginning of the Eclipse [19659002] 5.30am: The moon can be seen at the most red

6.21am: Maximum eclipse

7.13am: Total eclipse finishes

The total lunar eclipse of July 27 will be visible for large parts of the eastern hemisphere.

It will reach a maximum eclipse at 9:22 (BST), however, the total eclipse will last a total of 1 hour 43 minutes.

Skygazers from South America will be able to see some of the last stages of the eclipse just after sundown on July 27th.

On the other hand, New Zealanders will be able to observe the beginning of the eclipse before sunrise on July 28th.

He will not be visible at all in the United States.

Parts of Central Asia, the Middle East and East Africa will see the lunar eclipse in its entirety.

This means that the moon will be under the horizon in Britain when the eclipse will begin.

Although the moon is smaller than usual at its distant position in its orbit, it will still be visible to the naked eye.

If the sky is clear, watching the moon will be enough to see the shadow of the Earth cross its surface.

A telescope will undoubtedly improve this, but is not essential.

Unlike a solar eclipse, where the moon crosses the path of the Sun, it is perfectly safe to look directly at the lunar eclipse.

Areas with low light pollution will see a lighter eclipse.

To escape this ubiquitous glow, head to a high point of view or to the countryside

An eclipse occurs whenever a planet or moon pbades between another planet, the moon or the sun.

According to their orbits, they can be total or partial.

A lunar eclipse is a specific event The earth aligns directly between the sun and the moon.

When this happens, the Earth blocks the sun's light from the moon. The shadow of the Earth then falls on the moon

During a lunar eclipse, we can see the shadow of the Earth on the moon.

They can last several hours, but it is rare that a total eclipse lasts more than 100 hours. minutes.

At least two lunar eclipses occur each year

A lunar eclipse is a specific event that occurs when the Earth aligns directly between the sun and the moon

There There are two main ways to take photos on your iPhone – with the built-in camera software, or via a third-party application app store.

You will get the best results using a separate application, but there are some specific settings you need for both.

Using a Night Photography App:

1 – Go to the App Store and download a night photography app. For iPhone The NightCap Pro application is recommended

2 – Start by reducing ISO, which affects the camera sensitivity of your camera.

To do this, launch the Nightcap app and slide your finger down on the left side of the screen. Set the ISO to a minimum of 25 to 64, depending on the model of the iPhone.

You will get the best results by using a separate application for iPhone. Go into the app store and download a night photography app, like NightCap Pro

3 – Adjust your exposure by sliding your finger up and down on the right side of the screen to adjust the brightness.

4 – Set your focus to 100 (infinite). This usually happens automatically, but if you do not slide your finger to the right in the lower half of the screen to adjust it manually.

5 – Once you are satisfied with the image appearing on the screen, click on the circular button at the bottom of the application to take a picture.

Using the built-in camera of the iPhone:

1 – Turn off the flash. This only illuminates nearby objects that could ruin your image. To do this, tap the lightning icon at the top of the application and tap the word "Disabled".

The iPhone 8 and the iPhone X now offer enhanced features in low light conditions. l & # 39; darkness.

2 – Zoom in. If you need to make the moon more visible in your image, it's time to do it. Pinch on the screen with two fingers to zoom in or out.

Digital zooms reduce the quality of your image, so it is not recommended to use more 2x zoom.

iPhone 7 Plus, iPhone 8 Plus and iPhone X lets you zoom in with optical zoom rather than digital zoom, which will give you better results.

3 – Lock the focus on your subject by tapping and holding the screen where the moon appears. This will bring up the lock square of the auto focus.

4 – Change the exposure of the image by using the sun logo slider on the right side of the auto focus lock box. This will prevent the moon from appearing blurry in your images.

5 – Once you are satisfied with how your image appears on the screen, click the circular capture button at the bottom of the application.

It is best to do it remotely, for example via the volume buttons on your headphones, to avoid shaking your finger.

Android users have options similar to those of iOS, with a choice between integrated application and third-party software.

Here is a step-by-step guide for both methods:

Take a picture of the moon on the built-in Android Camera:

Each version of Android may be slightly different, because the operating system can be customized by the individual handset manufacturers, so the instructions may vary.

1 – Turn off the flash in the camera application. The flash will only illuminate nearby objects and will bounce light into the lens, which could ruin your shot.

Tap the flash icon on the side or top of the screen and make sure to select the flash in a circle with a line that pbades through it – representing the flash as "Off"

2 – You will need to zoom in for the best results. If you need to make the moon more visible in your image, tap the screen with two fingers and use the broadcast gesture to zoom in or the pinch gesture to zoom out. However, this will reduce the quality of your image, so it is not advisable to overdo it.

3 – Many Android phones have a manual mode to zoom in and customize the camera settings. Open the camera application, then press the icon of the three vertical lines in the upper left corner, then press Manual

4 – On the left side of the interface of the camera, you will see a JPG icon. [19659002] Tap on it and it will go to RAW JPG. This will make corrections to the image while keeping a high quality image after it has been taken.

5 – Change the exposure value by pressing the EV option on the screen and selecting a low exposure

6 – Select the ISO option and choose a value between 80 and 100.

7 – Increase the shutter speed, using the S option on the screen, and choose the longer option. This will keep the shutter open longer, so it is crucial to make sure the camera is still while the picture is taken.

8 – Once you are satisfied with how your image appears on the screen, click the button on the bottom of the application.

Using a third-party application to improve your image:

1 – Go to Google Play and download a relevant application. The Adobe Lightroom app, available for iPhone, allows you to enhance the photos once they have been taken and make the most of the camera picture of your Android device.

2 – Open the Lightroom app and click on the right corner icon, if you want to use its built-in camera. You can also go to step 7 to edit the images taken with the built-in Android application.

3 – Make sure the file format is set to DNG rather than JPG. It is an uncompressed raw format, similar to those used by professional photographers, which captures many more details.

The Lightroom application of Adobe, also available for iPhone, allows you can enhance the photos once they have been taken and make the most of your Android's camera

4 – Reduce exposure by swiping left with your finger on the image, until the moon appears gray instead of white. If you take this too far, you can increase the exposure by sweeping to the right.

5 – Make sure your flash is disabled by clicking on the flash icon in the upper right corner and selecting Off.

6 – Once you are satisfied with how your image appears on the screen, click the circular capture button at the bottom of the application.

7 – Edit your image in the Lightroom app using Adobe Photoshop technology to enhance your photos. This includes increasing the clarity and zooming in on an image once it has been taken.

To edit your image, click the X button on the camera window, then select the image you want to edit. A range of tools is then available at the bottom of the screen

Throughout the month of July, the orbit of Mars and the Earth will line up in a rare phenomenon known as perihelic opposition. It will eclipse Jupiter, recording 1.8 times brighter in the night sky

Mars will be up all night, rising after sunset and going to bed at sunrise. Mars should be visible to the southeast, located just below the constellation Sagittarius

HOW TO SEE MARCH IN THE NIGHT SKY, WHILE THE RED PLANET IS CLOSER TO EARTH [19659149] On July 27, Mars will pbad closer to Earth than it did for 15 years

The phenomenon, known as perihelian opposition, will bring the planet red larger and lighter than normal in the night sky. The rare event occurs when Mars reaches its closest point to the sun, at the same time that the Earth's orbit brings it directly between the two.

Although the current opposition point will be on July 27, March will be significantly larger. The majority of July

Opposition to perihelion can be seen at the naked eye, which means that it is not necessary to have expensive equipment for star watchers to spot a rare event next month.

He will eclipse Jupiter, recording 1.8 times brighter in the night sky

Mars will be up all night, rising after sunset and going to bed at sunrise.

Stargazers hoping to spot the northern red planet. the hemisphere should check the sky in the hours before dawn.

Mars should be visible to the southeast, located just below the constellation Sagittarius.

Meanwhile, the best view of the phenomenon will be appreciated in the southern hemisphere.

For example, the New Zealand capital Wellington will enjoy a view of the red planet as it reaches a maximum altitude of 74 degrees in the sky at the end of July.